7' 178MM POLISHING BONNET WOOL
Tax included.
Tie on polishing wool buff
Diameter: Ø180mm
Use backing pad:
PG33805
Application:
The polishing wool buff should be used with an automotive polisher. Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is the same as the backing pad's diameter.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
TIP:
The buff is washable after use if the polishing compound is soluble.
Tie on polishing wool buff range:
ORDER NO. | DIAMETER | USE BACKING PAD |
MM4 | ø100mm | |
MM5 | ø125mm | TCBP125C / PG338 |
MM6 | ø150mm | TCBP150C |
MM7 | ø180mm | PG33805 |
MM7-2 | ø180mm | PG33805 |
MM8 | ø200mm | |
MM9 | ø230mm | |
MM9-2 | ø230mm | |
MM10 | ø250mm |
Recommended polishing compounds to use:
- Liquid Shine™ High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.
- Liquid Shine™ Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.
- Liquid Shine™ Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step