YYD-6 12V 24V DC Trigger Delay On and Off Cycle Timing Control Timer Switch Dual MOS Power Tube Module

Specifications:

 

- Input voltage: DC / AC 7V ~ 27V

- Output power: can control DC load within 10A

- Time range: 0.01 seconds to 999 minutes adjustable at any time

- Usage: It can control 2 way solenoid valves, pumps, motors, lights, etc.

 

Wiring Port Description:

 

1, DC+: Input power positive 7V~27V

2, DC-: input power negative

3. IN1: signal input terminal 1 (negative trigger)

4, IN2: signal input 2 (negative trigger)

5, IN3: signal input 3 (negative trigger)

6, O1+: output 1 positive (directly connected to the load, such as solenoid valve)

7, O1-: output 1 negative

8, O2+: output 2 positive (directly connected to the load, such as solenoid valve)

9, O2-: output 2 negative

 

Function List: 

 

Function can be arbitrarily set to buy back, there are instructions provided; power failure can memorize any parameters set

 

P--1: Give signal 1, output 1 will stop automatically when it is working until A time; give signal 2, output 2 will stop automatically when it is closed to B; signal 3 is emergency stop reset signal

 

P--2: Give signal 1, output 1 will stop automatically when it reaches the A time; output 2 will stop automatically after the delay of B time from the signal to the C time (this function time unit needs to be consistent)

 

P--3: After power-on, output 1 works until A time release, waits for C time, output 2 works until B time release, waits for C time; output 1, 2 turns work infinite loop

 

P--4: Give signal 1, output 1 work; give signal 2, output 1 stops and starts timing until A time output 2 works; give signal 3, output 2 stops and starts timing to B time output 1 work; infinite loop

 

P--5: Give signal 1 and output 1 to work; give signal 2, output 1 stops and starts timing until A time output 2 works; give signal 3, output 2 stops; give signal 1 again; execute again

 

P-6: give signal 1, output 1 work; give signal 2, output 1 stop; then give signal 1, output 2 work; give signal 3, output 2 stop;

 

Button Setting Instructions:

 

Power on display ''--'' means to enter standby mode;

Press the first K1

Screen display: P-1: K2 and K3 adjustment mode

Press the second time K1, the screen displays: A001: K2 and K3 adjust the first time A, K4 adjust the decimal point (time unit)

Pressing the third K1, the screen displays: B001: K2 and K3 adjust the second time B, K4 adjusts the decimal point (time unit)

Press the fourth K1, the screen displays: C001: K2 and K3 adjust the third time C, K4 adjust the decimal point (time unit)

Pressing K1 for the fifth time, ''--'' is displayed to enter the standby state;

For example:  the setting mode needs to be: P--2; the time is: A010 B005 C006;

Indicates the second mode of operation; after signal 1 is output; output 1 is turned off after 10 seconds; output 2 is delayed by 5 seconds, then 1 second is automatically turned off.

 

Decimal Time Unit Description:

 

X.XX decimal point in hundred, timing range: 0.01 seconds to 9.99 seconds

XX.X decimal point in ten, timing range: 0.1 seconds to 99.9 seconds

XXX has no decimal point, timing range: 1 second ~ 999 seconds

XXX. The decimal point is in one place, the time range is from 1 minute to 999 minutes.

 

Package Included:

 

1 x YYD-6 12V 24V DC Trigger Delay On and Off Cycle Timing Control Switch