ANENG AN8207L Digital Multimeter AC/DC Current Voltage Resistace Frequency Capacitance Tester
Tax included.
Features:
The meter is a handhold 3 1/2 digital multimeter for measuring DC and AC Voltage, DC and AC current, Resistance, Diode, Transistor, capacitance and continuity test with battery operated. The back light of display is optional.
The meter is a handhold 3 1/2 digital multimeter for measuring DC and AC Voltage, DC and AC current, Resistance, Diode, Transistor, capacitance and continuity test with battery operated. The back light of display is optional.
Display: 1999(3 1/2) digital LED display
Polarity indication: ”-” displayed for negative polarity
Return zero: Auto
Over range indication: √
Low battery indication: √
Sampling rate: about 3 times per second
Specification:
DC Voltage
DC Voltage
| Range | Resolution | Accuracy |
| 200mV | 100uV | |
| 2V | 1mV | ± (0.5%+3) |
| 20V | 10mV | |
| 200V | 100mV | |
| 1000V | 1V | ±(1%+5) |
AC Voltage
| Range | Resolution | Accuracy |
| 200mV | 100uV | ± (1.2%+3) |
| 2V | 1mV | ±(0.8%+5) |
| 20V | 10mV | |
| 200V | 100mV | |
| 700V | 1V | ±(1.0%+5) |
DC Current
| Range | Resolution | Accuracy |
| 2mA | 1uA | ±(1.0%+3) |
| 20mA | 10uA | |
| 200mA | 100uA | ±(1.5%+5) |
| 20A | 10mA | ±(2.5%+5) |
AC Current
| Range | Resolution | Accuracy |
| 2mA | 1uA | ±(1.2% +5) |
| 20mA | 10uA | |
| 200mA | 100uA | ±(2.0%+5) |
| 20A | 10mA | ±(3.0%+10) |
Resistance
| Range | Resolution | Accuracy |
| 200Ω | 0.1Ω | ±(1.0%+10) |
| 2KΩ | 1Ω | ±(0.8%+3) |
| 20KΩ | 10Ω | |
| 200KΩ | 100Ω | |
| 2MΩ | 1kΩ | |
| 20MΩ | 10KΩ | ±(1.2%+8) |
| 200MΩ | 100KΩ | ±5.0%(-10)±10 |
Capacitance
| Range | Resolution | Accuracy |
| 20nF | 10pF | ±(4.0%+3) |
| 200nF | 100pF | |
| 2uF | 1nF | |
| 20uF | 10uF | ±(5.0%+5) |
| 200uF | 100uF |
Diode & Sound on/off Test
| Range | Illustration | Test Conditions |
| Diode | Tested diode forwards voltage drop | Forward direct current: about 1mA Direct reverse voltage: about 3V |
| Sound | When tested resistance approximately<70Ω, inner buzzer will ring | Open-circuit Voltage: about 3V |
Triode hFE Parameter Test
| Range | Illustration | Test Conditions |
| hFE | Can test the hFE parameter(0-1000) of type NPN/PNP triode | Base current: about 10uA Vce: about 2.8V |
Frequency
| Range | Revolution | Accuracy |
| 2kHz | 1kHz | ±(2.0% + 5) |
| 20kHz | 10kHz | ±(1.5% + 5) |
General Information:
Power: 9V battery (NEDA 1604 or 6F22) (NOT Included)
Operating environment: 0 to 40?? humidity≤75% RH
Storage temperature: -10?�to 50?? humidity≤80% RH
Maximum voltage between terminals and earth ground: 1000VDC or 700 VAC
Fuse protection : F 200mA/250V
Size: 18.5cm x 9cm x 4.8cm
Weight: Approx.306g
Package Included:
1 x ANENG AN8207L Digital Multimeter
1 x Pair of Test Leads
1 x Operator’s Instruction Manual
1 x Hold Portable bag
