4X50CM USB RGB 5050 LED Waterproof Strip Light TV Backlilghting Kit + 24 Key Remote Control DC5V
Tax included.
Features:
1. 5V USB-powered, can be connected to the TV USB interface directly without any external power supply.
2. Simple Installation, with the usage of sub-structure, you can prevent the falling off the entire light bar caused by the generated stress from the corner of the paste;with four 50cm light bars and three 60cm long cables, you can use the strip light in any size of TV screen.
3. With a 24-key remote control, you can adjust 15 different colors, the brightness of the strip light and change flash, strobe, fade, smooth modes.
4. Waterproof lights, dampproof, dustproof, color uniformity, high brightness, strong adhesion.
5. With color memory function
Specification:
Power Interface:USB
Voltage of the Strip Light:DC5V
Power Cord length:80CM
Connecting Cable Length:60CM
Connector Type:4pin
Output Voltage /Current of the Controller:5V/6A
Remote Control Type:24 Key IR Remote Control (CR2025 Battery is Included)
Light Bar Length:4*50CM
Lamp Beads Type:5050 SMD
Lamp Beads:15 LEDs /Piece
Color:RGB[4 Light Mode: RGB transition / RGB strobe / RGB gradient / RGB smooth change;16 color static mode : Color changing ,brightness adjustment]
Beam Angle:120°
Power of the Strip Light:about 3W /Piece
Dimension:W10mm* T2.8mm
Waterproof Rating:IP65
Note:
4pin connector, arrow and light +5 V interface docking;
If the color of the strip light doesn’t match with the the color you press in the remote control, please proceed the following steps :
1.Turn off the remote control
2.Press the remote control at the signal receiving port of the controller and press the button in the lower right corner of the remote control
(24 key remote control: press the "SMOOTH" button .44 key remote control: press "FADE" key) when the light bar flashes, which means that the remote has been debugged successfully.
3.Turn on the remote to see if the lighting color matches with the remote control's color
If it still does not match, repeat the above steps (debug six times for a cycle)
Package Included:
4X LED Light Bar
3X Connecting Cable
1X Controller
1X 24 Keys Remote Control
1X USB Cable
10X 4Pin Connector
1. 5V USB-powered, can be connected to the TV USB interface directly without any external power supply.
2. Simple Installation, with the usage of sub-structure, you can prevent the falling off the entire light bar caused by the generated stress from the corner of the paste;with four 50cm light bars and three 60cm long cables, you can use the strip light in any size of TV screen.
3. With a 24-key remote control, you can adjust 15 different colors, the brightness of the strip light and change flash, strobe, fade, smooth modes.
4. Waterproof lights, dampproof, dustproof, color uniformity, high brightness, strong adhesion.
5. With color memory function
Specification:
Power Interface:USB
Voltage of the Strip Light:DC5V
Power Cord length:80CM
Connecting Cable Length:60CM
Connector Type:4pin
Output Voltage /Current of the Controller:5V/6A
Remote Control Type:24 Key IR Remote Control (CR2025 Battery is Included)
Light Bar Length:4*50CM
Lamp Beads Type:5050 SMD
Lamp Beads:15 LEDs /Piece
Color:RGB[4 Light Mode: RGB transition / RGB strobe / RGB gradient / RGB smooth change;16 color static mode : Color changing ,brightness adjustment]
Beam Angle:120°
Power of the Strip Light:about 3W /Piece
Dimension:W10mm* T2.8mm
Waterproof Rating:IP65
Note:
4pin connector, arrow and light +5 V interface docking;
If the color of the strip light doesn’t match with the the color you press in the remote control, please proceed the following steps :
1.Turn off the remote control
2.Press the remote control at the signal receiving port of the controller and press the button in the lower right corner of the remote control
(24 key remote control: press the "SMOOTH" button .44 key remote control: press "FADE" key) when the light bar flashes, which means that the remote has been debugged successfully.
3.Turn on the remote to see if the lighting color matches with the remote control's color
If it still does not match, repeat the above steps (debug six times for a cycle)
Package Included:
4X LED Light Bar
3X Connecting Cable
1X Controller
1X 24 Keys Remote Control
1X USB Cable
10X 4Pin Connector