Car Fuse Current / Resistance Tester / Voltage Tester Circuit Tester
Tax included.
Car Fuse Current / Resistance Tester / Voltage Tester Circuit Tester
Description:
This test can be used to quickly and accurately safely out of the fuse box in the car to measure current,
Can be used for passenger cars and commercial vehicles fault circuit on the search. It comes with an LCD screen,
Easy to use, it can be directly plugged into the car's fuse panel.
Technical parameters:
Current Test
Measuring range : 0.1A-19.9A
Maximum load : 20A/48V DC, the maximum duration of 10 seconds
Accuracy : ± 2%
Fuse Type : Medium Blade Fuse
Operating temperature : 0 -40
Storage temperature : -10 -50
Voltage Test
Measuring range :1-48V
Accuracy : ± 2%
Note : When the test voltage is less than 1V, LCD display will show Err
Instructions:
1,The vehicle 's ignition off, remove the fuse circuit under test , the tester will fuse it into the socket ,
This will ensure the protection circuit in the correct level.
2,The test piece is inserted into the car 's fuse socket.
3,If necessary , start the ignition of the car, so that the test circuit is live , open tester power switch.
4,So that the test circuit is in working condition, the measured current value of the test 's screen will display
Safety instructions:
1,During the test , flaky fuse may become hot , remove it before , you should wait for it to cool
2,When used, must not exceed the maximum test load : 20V/48V, the maximum duration of 10 seconds
3,Before connecting and removing the test , make sure the car 's ignition is turned off.
4,Do not disassemble and modify the tester tester line
5,Maintaining a dry tester
6,Remove the tester , do not pull the cable tester
7,When the tester is damaged or not working properly, do not use
8,When the test is not in use, should be stored in a dry location safe and reach of children
Package Included:
1 X Car fuse current / voltage tester
.jpg)
.jpg)
.jpg)
.jpg)
Description:
This test can be used to quickly and accurately safely out of the fuse box in the car to measure current,
Can be used for passenger cars and commercial vehicles fault circuit on the search. It comes with an LCD screen,
Easy to use, it can be directly plugged into the car's fuse panel.
Technical parameters:
Current Test
Measuring range : 0.1A-19.9A
Maximum load : 20A/48V DC, the maximum duration of 10 seconds
Accuracy : ± 2%
Fuse Type : Medium Blade Fuse
Operating temperature : 0 -40
Storage temperature : -10 -50
Voltage Test
Measuring range :1-48V
Accuracy : ± 2%
Note : When the test voltage is less than 1V, LCD display will show Err
Instructions:
1,The vehicle 's ignition off, remove the fuse circuit under test , the tester will fuse it into the socket ,
This will ensure the protection circuit in the correct level.
2,The test piece is inserted into the car 's fuse socket.
3,If necessary , start the ignition of the car, so that the test circuit is live , open tester power switch.
4,So that the test circuit is in working condition, the measured current value of the test 's screen will display
Safety instructions:
1,During the test , flaky fuse may become hot , remove it before , you should wait for it to cool
2,When used, must not exceed the maximum test load : 20V/48V, the maximum duration of 10 seconds
3,Before connecting and removing the test , make sure the car 's ignition is turned off.
4,Do not disassemble and modify the tester tester line
5,Maintaining a dry tester
6,Remove the tester , do not pull the cable tester
7,When the tester is damaged or not working properly, do not use
8,When the test is not in use, should be stored in a dry location safe and reach of children
Package Included:
1 X Car fuse current / voltage tester