Machifit Automatic Tool Sensor Z Axis Tool Press Sensor CNC Setting Gauge Engraving Machine Accessories

Description:

Machifit High Precision Automatic Tool Sensor Z Axis Tool Press Sensor CNC Setting Gauge Engraving Machine Accessories

Specifications:

Features:

- Dustproof and waterproof Durable:

Dustproof and waterproof design, under the conditions of cooling liquid and iron dust flying, it is still able to work steadily.

- No need for built-in amplification:

Not beacause of the location of the knife on the instrument temperature, power supply voltage fluctuations caused by bias cna be directly input to the NC program.

- Alarm signal reflected in time:

Super-strokes when the alarm signal in time to avoid equipment operation caused by other problems, more convenient to use.

- Precision high-strength anti-jamming:

The sharp corners of the tool are directly contacted to process the tool top with dimension concerned, and the size and output signal of the tool tip are measured, so the accuracy is higher than that of converting the average value through the quantity of light and electricity in the way of laser and electricity.

Sensor Usage Precautions:

1.Contact can not exceed the knife on the trip, or the tool is easy to damage the knife(Travel is 5mm)

2.When touching the tool holder contact surface by hand do not let go immediately, so as not to damage the tool setter. The internal structure of the impact of the use of efficiency and life expectancy.

3.After the tool is set on the knife, you must lift the knife vertically to leave the contact surface, do not move laterally. Easy to damage the tool.

Installation Instructions:

1.Tool and sensor interface must be vertical and vertical contact with the contact surface down, try to install the workbench less iron, so as not to affect the accuracy of the knife.

2.Within the rated voltage range of the use of voltage control in DC10-30V, the current is below 20mA, the use of temperature -25?ƒ~70?? the use of better.

3.The tool diameter of the knife control in the following 20mm, knife speed control at 50-200mm/min. Tool center should fall on the center of the tool face.

4.The use of inflatable function, the trachea of the outer diameter of 6mm, an inner diameter of 4-5mm, should pay attention to hygiene, cleaning the contact surface attached to the iron.

Package Included:

More Details: