X750 Shield 18650 UPS HAT & Safe Power Management Expansion Board for Raspberry Pi 4 Model B/3B+/3B/2B
Tax included.
Overview:
The X750 is a multi-functional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides intelligent and safe power management, safe shutdown, full power off through software and an advanced uninterruptible power supply.
The X750 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications, and it's the high-end product of the Geekworm UPS family.
Click for more info.
Package included:
1 x X750 Expansion Board
1 x GPIO and power daughterboard
1 x 8-pin connection cable
8 x Screw M2.5*5 mm
2 x Spacer M/F M2.5*22+6 mm
2 x Spacer F/F M2.5*22mm
The X750 is a multi-functional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides intelligent and safe power management, safe shutdown, full power off through software and an advanced uninterruptible power supply.
The X750 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications, and it's the high-end product of the Geekworm UPS family.
| Item | Description | |
| FOR USE WITH | Raspberry Pi 4 Model B/3B+/3B/2B/A+/B+ | |
| OPERATING SYSTEM | · Raspbian Stretch · Safe shutdown function tested for Raspbian, other operating systems to be tested and advised |
|
| KEY FEATURES | UPS Function | · Smart and powerful Uninterruptible Power Supply (UPS) · Provides continuous operations for up to 10~30hours (depending on battery type and qty used) · Max 5.1V 8000mA Power Backup for even the most demanding RPi set ups · Four 18650 Cells Lithium Ion Holder, can work with only two or three or four 18650 Lithium Ion batteries · Can work with X750-A2 4-cell battery holder to increase battery capacity up to 38400mAh (12 18650 batteries) · Supports 2A via micro-USB socket or 3A via DC jack fast charging · Integrated battery protection circuit · Integrated over current protection and over voltage protection · Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c) - Cabling required · Integrated 10-A fully-integrated synchronous boost converter · Intelligent automatic charging and discharging · On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100% · On-board blue LED show the status of power on/off |
| Safe power management | · Equipped with momentary button for easy power control Press the button to turn on Press the button and hold for 1~2seconds to reboot Press the button and hold for 3~7seconds to implement safe shutdown Press the button and hold for >8seconds to force shutdown · Supports safe shutdown and full poweroff through software · On-board blue LED shows the status of power on, reboot and shutdown · On-board pin header to select auto power-on when power supplied or battery installed · Ultra-low standby power consumption of μA to maximize battery life · Operate in both charge mode and boost mode to allow full system management and battery power management · Advanced system power path management avoids frequent charging and extend battery life · Advanced system power path management allows 3A fast charging and powering Raspberry Pi at the same time · Powers the Raspberry Pi via the 40-pin header - no additional cabling required · On-board DC power jack (5.5*2.5mm) and XH2.54 connector convenient for power input · On-board PH2.0 connector allows to connect external power switch and DIY your perfect case · On-board XH2.54 power output connectors allow to power other devices · Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X750 assembly |
|
| X750-A2(To expand X750) | · With four 18650 cells Lithium Ion holder · Ideal solution to increase battery capacity (total battery capacity up to 38400mAh, 12 18650 batteries) · Integrated battery protection circuit · Mounting holes and standoffs provide mechanical stability of the Raspberry Pi, X750 and X750-A2 assembly |
|
| POWER SUPPLY | · Via Micro-USB socket: 4.7~5.5Vdc, 2.5A; · Via DC power jack: 4.7~5.5Vdc ±5%, ≥4A · UPS output : 5.1V ±5% Max 8A · UPS charging current: 2A via Micro-USB socket, 3A via DC jack · Terminal Battery Voltage : 4.2V · Recharge Threshold : 4.1V |
|
| NOTE | · Power path management only enabled when applying power to the DC power jack · Do not apply power to your Raspberry Pi via the Micro USB socket or Type-C socket. · Do not use 18650 battery with built-in protection circuit |
|
Click for more info.
Package included:
1 x X750 Expansion Board
1 x GPIO and power daughterboard
1 x 8-pin connection cable
8 x Screw M2.5*5 mm
2 x Spacer M/F M2.5*22+6 mm
2 x Spacer F/F M2.5*22mm