EWRF e7087UPro 5.8GHz 48CH 0/25/100/200mW Adjustable FPV Transmitter VTX Support SBUS OSD For Runcam Camera

Description:
Brand Name: EWRF
Item Name: EWRF e7087UPro 5.8GHz 48CH 0/25/100/200mW Adjustable FPV Transmitter VTX

Frequency: 5.8G 48CH

Transmitting Power: 25mW/100mW/200mW/OFF(Pitmode)

Power supply: DC 5-24V
Supply current(12V): 60mA(25mW) / 80mA(100mW) / 100mA(200mW)
Weight: 3.1g 

Size: Design for RunCam 

Main Features:

- Adjustable 4 modes: 25mW/100mW/200mW/OFF

- Betaflight/Cleanflight OSD configuring parameter

- Support SBUS configuring parameter 

- Clean powerup and channel switching without interference to others

- Miniature and light weight design

- 12V 100mA 200mW

Frequency(Mhz):

Band	CH1	CH2	CH3	CH4	CH 5	CH6	CH7	CH8
A	5865	5845	5825	5805	5785	5765	5745	5725
b	5733	5752	5771	5790	5809	5828	5847	5866
c	5705	5685	5665	5645	5885	5905	5925	5945
d	5740	5760	5780	5800	5820	5840	5860	5880
E	5658	5695	5732	5769	5806	5843	5880	5917
F	5362	5399	5436	5473	5510	5547	5584	5621

User Guide:

1.LED Indication

- The red LED indicates the state of working mode or the item when setting the VTX(flashing 1 time means selecting the channels, flashing 2 times means selecting the bands, flashing 3 times means selecting the power levels).

- The blue LED indicates the state of Pitmode or the value of item when setting the VTX( e.g. when selecting the channels, 3 times of flashing means channel 3. When selecting the bands, 3 times of flashing means band C.As for the item of power levels,3 times of flashing means at the power level of 200mW)

 

2.Working Mode Indication

- After powering up, the red & blue LEDs will signal the following three items of VTX in turn: channel, band and power level(the flashing times of the red and blue LEDs indicate the item and the value respectively). After that, the LEDs indicate the working modes.

- Normal: The red & blue LED are on. 

- Pitmode:The red LED is on and blue LED is off. 

 

3.Setting

- Press and hold the button until the red LED flash 1 time which means the item of channel selecting, then press the button can select the channels(blue LED flashing times corresponds to the channel 1-8).
- Press and hold the button again, the red LED will flash 2 times which means the item of band selecting, then press the button can select the band(blue LED flashing times corresponds to the band A-F).
- Press and hold the button again, the red LED will flash 3 times which means the item of power level selecting, then press the button can select the power(blue LED flashing times corresponds to the power level).

- Finally, press and hold the button, save and exit the setting of VTX(This step is essential for setting).

- Press the button twice will toggle the ON/OFF of Pitmode.

 

4. SBUS Setting

Connected to the 6th channel of the receiver ,turn back and forth the switch can change channels. The operation similar to key trigger mode.

 

5.OSD Setting

For Betaflight/Cleanflight OSD setting of channel,band,power and Pitmode ,please referring to ‘Betaflight OSD setting of EWRF Transmitter’for details.

Note: 
- Make sure that there is enough space for airflow when installing the module   on the drone in case the overheating protection starts to reduce the power even to shut down at the worst.
- Please install the antenna before powering up for a longer use life.
  
Package Included:

1x EWRF e7087UPro 5.8GHz 48CH 0/25/100/200mW Adjustable FPV Transmitter