ALEKO 433MHz Backlight Wireless Keypad Universal Remote Control Switch For ALEKO Gate Door Access

Specifications:
 

Model	KP-01
Color	Black / Blue
Material	Plastic
Size	85×75×35mm / 3.3x3x1.4"
Power	6VDC 2 CR2032 (230mAh) lithium batteries
Battery life	About 2 years, 10 times a day
Working frequency	433.92 MHz +/-75KH
Emission power	About 1mW
Encoding format	HCS101 standard format
Working temperature	-10~+55 C
Digit number	0 to 8 bits
Launch distance	Open Distance 200 meters; indoor distance 35 meters
Protection grade	IP54

 

Product description:

 

-This is a dual channel transmitters that are activated only after having entered a Suitable combination.

-The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code      is changed at each transmission session.
 

-The estimated transmission range is 200 m in open space and 35 m indoors
 

-The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering 10 transmissions/day

Installation:
 

-Before physically installing the it in their mouning position it is good practice to perform a practical test to assess their functionality   and effective range.

-Consider that range may be up to 25 or 30% less when battery power is low 

 

positioning:
 

-Apart from the distance from the receiver, the units should not be positioned in the vicinity of or-worsestill-in contact with metal   structures, which could otherwise exert a signal shielding effect. Thanks to the enclosure protection rating of IP 54, the digital   selectors can be installed outdoors if required.

Audible signal status:
 

-1 short beep

-Keypad tone

-1 long beep

-Modification of combination confirmed (or send the signal after enter the correct password )

-5 short beeps

-Error during combination input or combination edit operation

-2 low beeps

-Battery low warning signal New batteries required

Method of use
 

-The use of the keypad is based on "combinations", i.e. numbers of from 1 to 9 digits that the user is required to key in by means of       the keys.Once the combination has been entered the user then presses confirm key3 or 4 to transmit the activation command

 to respectively.
 

-Receiver channel 1 if the user presses3
 

-Receiver channel 2 if the user presses4

-The command will be transmitted only when a valid combination has been entered ,if an incorrect combination has been entered the    selector will emit an error, warning signalwhen the confirom key is pressed 

-The combination entered must be exact,if, for example:the correct combination is 0422, the following attempts will be interpreted          as errors:422,10422, 04222
 

-Therefore, if the user inadvertently presses the wrong key,when entering a combination, combination key3 or 4 should be pressed        immedliately to generate the error tone,after which the correct combination can be entered starting from the beginning again

-While entering the combination no more than 6 seconds can be allowed to elapse between keystrokes,after which interval the              combination must be re-entered starting from the beginning.  

-The units are factory programmed with a standard combination to activate channel one and a standar combination for channel two

The factory set combinations are as follows:

 

-1a combination to transmit the code associated with the 3 key
 

-When the unit is used for the first time this combination is11

 

-2a combination to transmit the code associated with the 4 key
 

-When the unit is used for the first time this combination is 22