FY6900 30MHZ Dual Channel DDS Function Arbitrary Waveform Signal Generator Pulse Signal Source Frequency Counter Fully Numerical Control
Tax included.
Main Features:
??nbsp;Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals.
??nbsp;2.4 inch TFT Color LCD with 320?240 resolution, displaying parameters and graphics of the two channels at the same time.
??nbsp;The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution.
??nbsp;Can output up to 97 groups of functions / arbitrary waveform, contains 33 groups of preset waveforms and 64 groups of user-defined waveforms. Preset waveforms: Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, CMOS(0~12V), Four channels TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc.
??nbsp;Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits; (The longer the waveform storage depth, the more detail the waveform is saved, and the signal details can be restored with high p'recision.)
??nbsp;Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations.
??nbsp;Sweep Function: It can sweep 4 properties of signals including frequency, amplitude, offset and duty cycle; It has Linear and Logarithm two sweep types; 0.01S~999.99S sweep time; Up, Down and roundtrip sweep directions.
??nbsp;VCO Function (Voltage Control Output): Can be achieved by an external input signal: voltage controlling frequency, voltage controlling amplitude, voltage controlling offset, voltage controlling duty cycle and PWM modulations.
??nbsp;Burst Output Function: There has Manual Trigger, internal CH2 Trigger, and External Trigger for your options. It can output 1~1048575 pulse trains.
??nbsp;100M Frequency meter function: It can measure frequency, period, pulse width and duty cycle. Max. frequency workable is 100MHz and Min. frequency workable is 0.01 Hz.
??nbsp;Counter Function: It has 2 coupling measure modes including DC coupling and AC coupling. This design can solve inaccuracy problem of AC coupling.
??nbsp;Standard dual full functional channels which are equivalent to two independent generators.
??nbsp;Channel SYNC Function: Support waveform copy and state copy between channels.
Support two or more signal generators connected to achieve multi-channel output, the maximum support 16-channel synchronous output, the phase between each channel can be adjusted.
??nbsp;Precisely adjust the phases of the two channels, P'recision can be 0.01°.
??nbsp;Min amplitude resolution can be up to 1 mV. Amplitude range is 0~24Vpp.
??nbsp;Duty-cycle of each channel can be adjusted independently0.01%-99.99%, the adjusting resolution is 0.01%.
??nbsp;-12V~+12V DC Offset function. Resolution 0.001V.
??nbsp;Save function: It can save 20 sets user-set parameters and can be loaded at any time.
??nbsp;Communicating function: All functions can be controlled by PC program and the communication protocol is open for secondary development.
??nbsp;Output short-circuit protection: All channels can work more than 60 seconds when the load is short-circuited.
??nbsp;Provide powerful waveform editing PC software. Users can download arbitrary waveform to this instrument after edit through PC program which is included in user CD.
??nbsp;Adopt ABS plastic shell with table type design. Use 100-240V (AC) wide range voltage power supply.
??nbsp;Can choose our FYA2000S series or FPA1000 series power amplifier to output 20W~100W signal in DC-10MHz width without any distortion.
>Sine
>Square
>Rectangle
>Triangle/Ramp
>Rise Sawtooth
>Fall Sawtooth
>Lorenz Pulse
>Multitone
>Noise
>Electrocardiogram (ECG)
>Trapezoidal Pulse
>Sinc Pulse
>Narrow Pulse
>Gauss White Noise
>Step Triangle
>Positive Step
>Inverse Step
>Positive Exponent
>Inverse Exponent
>Positive Falling Exponent
>Inverse Falling Exponent
>Positive Logarithm
>Inverse Logarithm
>Positive Falling Logarithm
>Inverse Falling Logarithm
>Linear FM
>AM
>FM
>Positive Half Wave
>Negative Half Wave
>Positive Half Wave Rectification
>Negative Half Wave Rectification
>User-defined waveform
Technical Specification:
FY6900 can output Function/Arbitrary Waveform including:
>Sine
>Square
>Rectangle
>Triangle/Ramp
>Rise Sawtooth
>Fall Sawtooth
>Lorenz Pulse
>Multitone
>Noise
>Electrocardiogram (ECG)
>Trapezoidal Pulse
>Sinc Pulse
>Narrow Pulse
>Gauss White Noise
>Step Triangle
>Positive Step
>Inverse Step
>Positive Exponent
>Inverse Exponent
>Positive Falling Exponent
>Inverse Falling Exponent
>Positive Logarithm
>Inverse Logarithm
>Positive Falling Logarithm
>Inverse Falling Logarithm
>Linear FM
>AM
>FM
>Positive Half Wave
>Negative Half Wave
>Positive Half Wave Rectification
>Negative Half Wave Rectification
>User-defined waveform
Technical Specification:
Frequency | |||||||||
Model |
|
FY6900-30M |
FY6900-50M |
FY6900-60M |
|||||
Sine |
0~20MHz |
0~30MHz |
0~50MHz |
0~60MHz |
|||||
Square |
0~15MHz |
0~25MHz |
0~25MHz |
0~25MHz |
|||||
Ramp, Triangle |
0~10MHz |
0~10MHz |
0~10MHz |
0~10MHz |
|||||
Pulse |
0~10MHz |
0~10MHz |
0~10MHz |
0~10MHz |
|||||
TTL/CMOS |
0 0~10MHz |
0~10MHz |
0~10MHz |
0~10MHz |
|||||
Arbitrary Waveform |
0~10MHz |
0~10MHz |
0~10MHz |
0~10MHz |
|||||
Min pulse width |